how to draw 3d pictures with pencil step by step

Download Commodity

Download Article

3D drawings use optical illusions to make it appear that an image has depth. This technique can make any drawing come up to life. It may seem difficult to achieve but it is actually easier than information technology appears. With a few techniques, you can make 3D drawings of a wide variety of objects.

1. 1

   Describe a square. Creating a 3D box begins past but cartoon a square with your pencil, since some lines may demand to be erased. The square tin can be a diverseness of sizes, but it should just take up a quarter of the page at nearly. Center information technology on the page, so there is room to draw the rest of the box.<

   • In the terminal drawing, this first square will serve equally the forepart of your box.

2. 2

   Describe a second square that intersects with the first square. Place the second foursquare positioned slightly to i side and higher up the first square. Begin past drawing the bottom line of the 2d foursquare so its center intersects with the center of the left side of the start square. Then draw the right side of the second square and so that its middle intersects with the center of the top of the get-go square. Then finish drawing the meridian and left side of the second square.

   • The second square should exist exactly the same size as the first square.
   • This second square will be the dorsum of the cube in the final drawing.

   Advertisement

3. 3

   Add lines to connect the 2 squares. Connect each corner of the commencement square to its corresponding corner on the second square. For instance, describe a line from the upper left-hand corner of the start square to the upper left-hand corner of the second square.

   • These lines will create the illusion of the height, lesser, and sides of the cube.

4. 4

   Erase the lines to make the cube wait solid, if necessary. If yous are trying to draw a solid cube, as opposed to a transparent one, you need to erase some of the lines you have drawn. Erase any line that you wouldn't be able to come across from the angle yous have drawn.

   • Lines to erase include the lesser right-hand side connecting line, the right-paw side of the 2nd square, and the bottom line of the 2nd square.
   • It may seem strange that yous needed to draw these lines in the offset place, just they helped you draw the cube in the right shape.

5. five

   Color the sides of the cube if you lot similar. To highlight the 3D perspective of your drawing, you lot can colour each side of the box a different color. This makes it clear that the drawing has depth and that each side of the box is distinctive.

6. half dozen

   Draw variations of the 3D box. One time you become the hang of drawing the 3D box, y'all tin start drawing other shapes, such equally a rectangular box. For a rectangular box, get-go by drawing a rectangle. Then draw a second rectangle slightly to one side and higher up the beginning. Finally connect the corresponding corners of both rectangles together.

   • You tin do other shapes, such equally triangles, stars, or abstract shapes.

   Advertising

1. 1

   Cull the object you would like to describe. The object yous pick needs to have a clear and simple outline, as this volition make it easier to create your 3D drawing. For case, you could draw a hand, a banana, or a doughnut. Each has a simple outline and overall shape.^[1]

   • Trace the particular you want to draw if it is a size that fits on your piece of newspaper. For case, you lot tin can use your hand, as it will fit on a standard slice of paper and can easily be traced.

2. 

   2

   Make a low-cal preliminary outline of the object with pencil. Either depict or trace the outline of the object yous want to draw on your slice of paper. Center the object on the folio, although it tin bear on the top or bottom of the paper if necessary.^[ii]

   • Draw this outline lightly so you lot tin can erase any unnecessary pencil marks subsequently in the process.

3. 

   3

   Draw horizontal, parallel lines across the folio. Encompass the whole the whole paper with these lines except for within the shape you lot have outlined. Brand the lines close together, at most 0.25 inches (0.64 cm) apart all the manner down the page.^[three]

   • It'southward easiest to describe these lines by using a ruler, so that they are completely directly and evenly spaced.
   • If you are using lined notebook paper, you could trace over the existing lines

4. 

   iv

   Draw curved lines inside the shape outline. First each of these curved lines where one of the direct parallel lines touches the outline. Describe the curve across the entire outline and so come back downwards, connecting at the end to the corresponding straight line on the contrary side of your outline.^[4]

   • Each curved line will complete a horizontal line that goes all the way beyond the page.
   • The curved lines should mimic the general shape of the particular you are cartoon. If the shape varies, the lines should gradually transition to follow the object's shape.

5. 

   5

   Trace over the completed horizontal lines. To make the 3D effect really pop, ascertain the lines you take drawn. Trace the unabridged length of all of these lines, including the straight sections and the curved sections. You can utilize a pen, colored pencils, or marking to trace the lines.^[5]

   • The ink can be done in any one colour or in a variety of colors.

6. vi

   Erase the pencil outline. Later the ink has dried, erase the initial outline that yous made. This will add to the 3D effect of your cartoon and make the object pop off the page.^[6]

   Advertisement

1. 

   1

   Study your subject area. If yous want to draw something in 3D that y'all accept in existent life, it tin can be assist to look at its details. Past looking at it, you lot can begin to understand how you will translate real earth depth on to a flat surface.

   • For case, if you want to draw a bowl of fruit sitting on a table, y'all should study how all the elements of your composition relate to each other. How much of the fruit, bowl, and table tin can you run across? Where does each part intersect with the others? Where are shadows located and where does the light hit your objects?

   EXPERT TIP

   Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, drawing and printmaking both in the U.S. and in Italy. She works primarily en plein air on the streets of Rome, and also travels for individual international collectors on commission. She founded Sketching Rome Tours in 2012 where she teaches sketchbook journaling to visitors of Rome. Kelly is a graduate of the Florence Academy of Art.

   

   Kelly Medford
   Professional Artist

   Effort unlike exercises to train your eye. Kelly Medford, a plein air painter, says: "One way to learn to depict in 3D is to do blind contour drawings. Look at the object that y'all're cartoon and never look at your paper. It forces your eyes to go slowly around the object with your manus following your eye on the paper. Y'all showtime seeing objects without preconceptions."

2. 

   ii

   Starting time a drawing with a horizon line. For drawings that aim to show a great distance, it's of import to create a horizon line where the heaven meets the land. This line creates a point that is the furthest abroad from the viewer. Information technology should usually be located betwixt a third and half of the way up your page and span the entire page.^[vii]

   • This is a swell mode to kickoff a landscape drawing. Once you lot draw the horizon line, you can begin drawing the foreground below information technology and the sky or big objects in the landscape above it.

3. 

   iii

   Incorporate a vanishing point in to a cartoon. A vanishing point is the spot where items in the distance disappear. In practical terms, it is the spot where parallel lines that go from the front of the image to the back of the paradigm come together on the page. Marking this spot at the center of your horizon line allows you to accept a spot to end items that are moving into the distance.^[8]

   • For instance, if you are looking direct down a route, there is a point in the distance where y'all tin no longer see the route. While the route will be wide at the bottom of your drawing, which is the spot closest to the viewer, the sides of the road will come together and stop at the vanishing point.

   Skillful TIP

   Kelly Medford is an American painter based in Rome, Italy. She studied classical painting, drawing and printmaking both in the U.S. and in Italy. She works primarily en plein air on the streets of Rome, and besides travels for private international collectors on committee. She founded Sketching Rome Tours in 2012 where she teaches sketchbook journaling to visitors of Rome. Kelly is a graduate of the Florence Academy of Art.

   

   Kelly Medford
   Professional person Artist

   Utilise transparent sheets to larn perspective. Kelly Medford, a plein air painter, says: "To learn perspective and foreshortening, use plexiglass or transparent sheets. Accept photographs of buildings that are in perspective and trace over them with tracing paper. You start to understand how angles go dorsum in space and are not flat."

   Advertising

Add New Question

• Question

  How can I draw in 3D?

  

  First, yous brand your horizon line. After that, you lot decide your vanishing indicate. Y'all may depict a line at that place if you would like. After that, draw your shape/picture/alphabetic character. And so, describe lines from the edges of your shape to the vanishing point. Practise not draw from the edges that will pierce the object. So, once all of the lines that aren't piercing the object are connected to the vanishing point, cut the lines to however long you wish the width to be. Erase the rest. Then, shade the opposite to where the sun would be. This will make it announced 3-D.

• Question

  How practise I know when and where to shade something?

  

  JustCallMe Ashley

  Community Answer

  Information technology simply depends on lighting. If the object yous wish to depict is right in front of you, simply written report where the light hits the surface of the object and where the shadows stand for with the calorie-free. Most shadows are in the corners or on the side where the calorie-free isn't reflecting off the surface of the object. Now the question of when? Well, first you must know where the lights striking the surface, Then yous shade reverse of the lighted surface.

• Question

  How can I draw a 3D table?

  

  Beginning by drawing a rectangle equally the tabletop. If it helps when drawing the 3D aspects, retrieve of the rectangle every bit a long, stretched out cube. Then, draw iv cylinders or 3D poles coming from each of the iv sides. You can look online for images of 3D tables and copy those if that'southward easier.

• Question

  How exercise I depict in 3D using a pencil on paper?

  

  First, draw a horizon line. From in that location, use a technique to brand the item appear like information technology is rising from the horizon line. Practice the outline showtime, and and then make full in the pocket-sized details.

• Question

  How practise I draw a 3D car?

  

  Draw a car and so draw extensions through the back. Also go to dragoart.com, they assist with annihilation regarding cartoon.

• Question

  How do I depict animals in 3D?

  

  Brandon Ross

  Community Answer

  Describe the outside as the inside and and then fill with ink and let dry.

• Question

  What are some shortcuts for making a 3D drawing?

  

  Just brand a vanishing bespeak and draw guidelines. You can draw objects betwixt them.

• Question

  Can I paint in 3D?

  

  You can make 3D artwork with any media, but since pigment is slightly harder to command, yous may demand more practice.

• Question

  Which things would I do to brand up a three-dimensional model of a house?

  

  Suspension the firm into basic shapes, like a pyramid for the roof and a cube for the firm. And so, you draw those 3D shapes stacked onto each other and add details.

• Question

  What's a vanishing point?

  

  A vanishing point is a point on the epitome plane of a perspective drawing where the two-dimensional perspective projections (or drawings) of mutually parallel lines in three-dimensional space appear to converge.

Enquire a Question

200 characters left

Include your email address to become a message when this question is answered.

Submit

Advertisement

Things You'll Need

• Newspaper
• Pencil
• Pen, colored pencils, markers or other colouring options
• Eraser
• Ruler
• The object you want to depict or a flick of information technology (Optional)
• Stencil to make perfect shapes (Optional)

About This Article

Article Summary X

To draw a simple box in 3D, start past cartoon a square in the center of a piece of paper. Next, draw an identical foursquare slightly to one side and above the offset square so the 2 squares intersect. Then, add lines that connect each corner of the first square to its respective corner on the second square to complete the 3D box. Using this same technique, experiment by cartoon other simple 3D shapes, such as triangles or stars! For tips on making your 3D objects look solid rather than transparent, read on!

Did this summary assist you?

Thanks to all authors for creating a folio that has been read 406,428 times.

Did this article help you lot?

rogersweandstaid.blogspot.com

Source: https://www.wikihow.com/Draw-in-3D

Share this post